Sales Advice from
Your shopping basket is empty.

2Thumb Putter Grip Fitting Instructions

Stage 1

Secure club in vice below grip.

Using utility knife, remove off grip and tape.

Clean shaft with solvent*.

(*White spirit or similar)

Stage 2

Apply double-sided tape, leave 1/4" overhang at butt end.

Smooth and remove backing.

Tuck in overhang

Stage 3

Apply solvent generously over tape.

Squirt liberally inside grip.

Shake to distribute.

Stage 4

Pour excess solvent from grip over entire taped surface.

Stage 5

Align grip with clubface.

Push grip quickly on shaft unti fully seated against shaft end.

Stage 6

Remove from vice.

Make final alignment adjustments.

Wipe clean.

Allow to dry for 24 Hours.